HOW TO REMOVE YOUR PIERCING JEWELRY AT HOME

HOW TO REMOVE YOUR PIERCING JEWELRY AT HOME

Have new piercings that are now completely healed? Congrats, Stud! Y'all're ready to swap out your piercing jewelry* to start decorating your Earscapes® with some new studs, hoops, huggies, or maybe even a dangle. Merely first: how do you have your piercing jewelry out? We're here to help break it down for you.

(*What's the difference between piercing jewelry and fashion jewelry? Check out our guide here . Studs but pierces with push-pin studs, clickers, and barbells.)

Push-Pivot STUDS

To remove your button-pin stud, firmly grasp both ends of the earring. Then, while property the flatback mail in place, twist and pull out the 'superlative' (the decorative piece).

When you pull out the 'top' (decorative piece of the stud), y'all'll notice that the post has a little bend to it—this is supposed to be at that place! This is how your top latches into its labret.

SCREW-IN STUDS (AKA INTERNALLY THREADED) & BARBELLS

Screw-in earrings (commonly referred to as internally threaded), have a threaded acme that screws into its mail.

To remove an internally threaded stud, firmly hold the flatback mail service tightly in one hand, while unscrewing the 'top' to the left .

Internally threaded barbells accept two assurance at each finish. To remove, firmly concur the post tightly in one hand, while unscrewing 1 of the balls at either end to the left . (*Both balls unscrew, and y'all can choose which ball is easiest to access and unscrew for you.)

Note: When wearing these earrings, yous want to make sure these are always tightly screwed in! Touching your earrings and sleeping on them tin can loosen the screw, making it easier for your earring to fall out. When y'all take these in, carefully tighten them every few days by twisting the 'tops' to the right.

SEAMLESS RINGS (AKA CLICKERS)

Seamless rings will have a subtle hinge and a closure that clicks in and out. This might exist a little hard to locate, so gently feel effectually the earring with your thumbnail to locate the swivel and closure. (or ask a friend)!

To remove your seam band, discover the closure point and click the hinged portion out, away from the rest of the earring.

FIXED BEAD RINGS (AKA Captive BEAD RINGS)

Fixed dewdrop rings take a ball that doesn't movement at the betoken of closure. The bead helps the earring move around less in your ear, and therefore helps it heal better and faster.
To remove your fixed bead ring, hold the earring on either side of the brawl and twist your fingers (and the earring) in opposite directions away from one some other. When the earring is opened, it should look like the offset of a spiral.

Captive Bead Rings are a dissimilar pattern of jewelry—the bead must be removed completely and there are two indentations on each side of the dewdrop. The ring uses tension to sit down in each indention on either side of the ring.

Having trouble with removing your piercing jewelry? Caput here to book a piercing jewelry modify service and our Studs piercers tin can help you remove your earrings safely. Have questions? E-mail us at heystuds@studs.com !